Monday 20 November 2017

DERANCOURT

Tools and safety equipment for the installation of energy and telecommunication networks

Mounting, anchoring and connection equipment for overhead low-voltage lines

Metal cable clip

Ref :
8611055 - 8611065 - 8611075 - 8611082 - 8611200 - 8611210
Name :
Metal cable clip
Characteristics :

FRANCE TELECOM approved equipment

The types of clips presented below are suitable for the main telecommunication cables,
especially for holding connecting cables when directing them along walls.
They have been tested and classified by FRANCE TELECOM and are made of non-magnetic
titanium-stainless steel. They are resistant to sea air and UV light as well as all chemical and
atmospheric oxidation.
Concrete-piercing nail mounting on the clip. Secured by hammer When fitted, the bar is
fastened so that the upper tab closes up the cylindrical part of the bar, leaving more room
for holding the cable in place.
 
Note: clips can be supplied without nails (add SC to the reference)
Clips 8611055, 8611200 and 8611210 are supplied with nails already fitted.
Slide the mouse over the photos for a larger display

Composition

  Ref Name  
8611055 Metal cable clip diam 5.5
8611065 Metal cable clip diam 6.5
8611075 Metal cable clip diam 7.5
8611082 Metal cable clip diam 8.2
8611200 Metal cable clip diam 5 - 7.8mm
8611210 Metal flat cable clip
Presentation
News
Insulated tools 1000V NF EN CEI 60900 - Insulated / insulating assembly tools
Sheath stripping tools - Tools for preparing high-voltage cables
Hand crimping tools / Crimping and hydraulic cutting tools
General tools
Blue coated tools - Non sparking tools- ATEX equipment - Tools for PE tube preparation
Storage
Electrical safety -LV voltage absence testers - Earthing and low/high-voltage short circuiting - Signing - Measuring devices
Individual protective equipment - Working at height
Mounting, anchoring and connection equipment for overhead low-voltage lines
Installation equipment
Bird protection devices
Insulated tools 1000V CEI-EN 60900
Coated tools for working in an explosive atmosphere ATEX I(II) NF E 74.400
Stripping tools - Tools for preparing hight-voltage cables